Standard Horizon MATRIX GX3000S - Manual (Page 66)

GX3000S Page 66
12.13 NAMING THE RADIO OR SECOND STATION MIC OR HANDSET
This function allows you to change the name of the RADIO or second station
microphones. Example: “RADIO - CABIN,” “RAM1 - HELM,” “RAM2 -
FLYBRIDGE.”
1. Press and hold down the [CALL(MENU)] key until
“ Radio Setup ” menu appears.
2. Press the [ENT] key, then select “ Unit Name ” in the
“ Radio Setup ” menu with the CHANNEL selector
knob.
3. Press the [ENT] key.
4. Turn the CHANNEL selector knob to select the Unit
(“ Radio ,” “ Ram1 ,”or “ Ram2 ”) to be named, then
press the [ENT] key.
5. Turn the CHANNEL selector knob to scroll through
the first letter of the channel name.
6. Press the [ENT] key to store the first letter in the name
and step to the next letter to the right.
7. Repeat step 6 and 7 until the name is complete. The
name can consist of up to twelve characters, if you
do not use all twelve characters press the [ENT] key
to move to the next space. This method can also be
used to enter a blank space in the name. To clear the
previous letter, press the [CLR] key.
8. Press and hold the [ENT] key to enter the name and
return to the “ Unit Name ” menu.
9. If you want to enter the name of another unit, repeat steps 4 through 8.
10. To exit this menu and return to radio operation mode press the [16/9] key.