Standard Horizon MATRIX GX3000S - Manual (Page 57)

Page 57 GX3000S
Manual Calling
1. Press the [CALL(MENU)] key. The “
DSC Operation ”
menu will appear in the display.
2. Turn the CHANNEL selector knob to select the “ POS
Send .”
3. Press [ENT] key to show the Position Send directory.
This directory uses the INDIVIDUAL Directory infor-
mation.
4. Turn the CHANNEL selector knob to select “ Manual ,”
then press the [ENT] key.
5. Enter the MMSI number (nine digits) which you want
to contact, then press the [ENT] key.
6. Press the [ENT] key to send your position to the se-
lected vessel.
11.9.3 Receiving a DSC Position Send Call
When another vessel transmits their location to the GX3000S, the following will
happen:
1. A ringing sound will be produced when the call is received.
2. Press the [16/9] key to stop ringing
3. The position from the calling vessel will be shown on the display of the radio
and also transferred to any Standard Horizon GPS Chart plotter if con-
nected.