Standard Horizon MATRIX GX3000S - Manual (Page 61)

Page 61 GX3000S
12.4 TIME LOCATION
This selection selects the time display between local time and UTC (time GPS
sends to radio). Time is displayed when GPS position (LAT/LON) is displayed
by press and holding the [H/L(NAV)] key.
1. Press and hold down the [CALL(MENU)] key until
“ Radio Setup ” menu appears.
2. Press the [ENT] key, then select “ Time Disp. ” in the
“ Radio Setup ” menu with the CHANNEL selector
knob.
3. Press the [ENT] key.
4. Turn the CHANNEL selector knob to select “
UTC ” or
“ Local .”
5. Press the [ENT] key to store the selected setting.
6. To exit this menu and return to radio operation mode
press the [16/9] key.
In the local time mode, the display shows the time by the 12-hour system.
Meanwhile, the display shows the time by the 24-hour system in the UTC mode.
12.5 TRUE MAGNETIC CHANGE (NAV display)
This selection allows customizing the GPS COG (Course Over Ground) dis-
played on the LCD to be in True or Magnetic.
1. Press and hold down the [CALL(MENU)] key until
“ Radio Setup ” menu appears.
2. Press the [ENT] key, then select “ Magnetic ” in the
“ Radio Setup ” menu with the CHANNEL selector
knob.
3. Press the [ENT] key.
4. Turn the CHANNEL selector knob to select “
On ” (rep-
resenting “Magnetic”) or “ Off ” (representing “True”).
5. Press the [ENT] key to store the selected setting.
6. To exit this menu and return to radio operation mode
press the [16/9] key.
(“UTC” mode) (“LOCAL” mode)