Standard Horizon MATRIX GX3000S - Manual (Page 43)

Page 43 GX3000S
11.5.3 Setting up the Individual/Group Call Ringer
When a Individual Call or Group Call is received the radio will produce a ringing
tone for 3 minutes. This selection allows the Individual Call ringer time to be
changed.
1. Press and hold down the [CALL(MENU)] key until
“Radio Setup” menu appear.
2. Turn the CHANNEL selector knob to select “DSC
Setup” menu.
3. Press the [ENT] key, then select “INDIV Ring” with
the CHANNEL selector knob.
4. Press the [ENT] key.
5. Turn the CHANNEL selector knob to select ringing
time of a Individual Call.
6. Press the [ENT] key to store the selected setting.
7. To exit this menu and return to radio operation mode
press the [16/9] key.
The GX3000S has the capability to turn off the Individual call ringer.
1. Press and hold down the [CALL(MENU)] key until
“Radio Setup” menu appear.
2. Turn the CHANNEL selector knob to select “DSC
Setup” menu.
3. Press the [ENT] key, then select “DSC Beep” with the
CHANNEL selector knob.
4. Press the [ENT] key.
5. Turn the CHANNEL selector knob to select “Individual”
if you wish to disable the Individual Call ringer, or
“Group” if you wish to disable the Group Call ringer
and press the [ENT] key.
6. Turn the CHANNEL selector knob to select “Off.”
7. Press the [ENT] key to store the selected setting.
8. To exit this menu and return to radio operation mode
press the [16/9] key.
If you wish to return to enabling the ringer tone, just re-
peat the above procedure, turning the CHANNEL selec-
tor knob to select “On” in step “6” above.