Standard Horizon MATRIX GX3000S - Manual (Page 14)

GX3000S Page 14
8.8 RECEIVER AUDIO TONE CONTROL
Allows the treble and bass of the speaker audio to be adjusted for best listening
in noisy enviroments. The effect is similar to adjusting a the treble and bass
controls on a stereo.
1. Press and hold down the [CALL(MENU)] key
until “ Radio Setup ” menu appears.
2. Press the [ENT] key, then select “ TONE CONT. ”
in the “ Radio Setup ” menu with the CHAN-
NEL selector knob.
3. Press the [ENT] key, then select “ BASS ” with
the CHANNEL selector knob.
4. Turn the CHANNEL selector knob to select de-
sired audio responce in the lower frequency
range. Available selections are “
–6 ” through “ +6 .”
5. Press the [ENT] key to store the selected setting.
6. Select “
TREBLE ” with the CHANNEL selector
knob.
7. Turn the CHANNEL selector knob to select de-
sired audio responce in the highr frequency
range. Available selections are “
–6 ” through “ +6 .”
8. Press the [ENT] key to store the selected setting.
9. To exit this menu and return to radio operation mode press the [16/9] key.