Standard Horizon MATRIX GX3000S - Manual (Page 12)

GX3000S Page 12
O
FFSET
T
IME
T
ABLE
8.4 CHECKING GPS CONNECTIONS
After connections have been made between the GX3000S and the GPS, a
small satellite icon will appear on the top right corner of
the LCD display. To see the additional GPS information,
press and hold the [H/L(NAV)] key. The GX3000S shows
the Date, Time, SOG and COG.
8.5 CHANGING THE GPS TIME
From the Factory the GX3000S shows GPS satellite time or UTC time. A time
offset is needed to show the local time in your area.
1. Press and hold down the [CALL(MENU)] key until
“ Radio Setup ” menu appears.
2. Press the [ENT] key, then select “ Time Set ” with the
CHANNEL selector knob.
3. Press the [ENT] key.
4. Turn the CHANNEL selector knob to select time off-
set from UTC. See illustration below to find your off-
set time from UTC. If “
0:00 ” is assigned, the time is
the same as UTC (Universal Time Coordinated or
GMT Greenwich Mean Time).
5. Press the [ENT] key to store the time offset.
6. Press the [16/9] key or turn the CHANNEL selector knob to select “
Exit ,”
then press the [ENT] key to return to the “ Radio Setup ” menu, select “ Exit ”
and press the [ENT] key to return to radio operation.