SMC Networks 486DX4 - Manual (Page 71)

AR-B1462 User¡ ¦s Guide
7-7
7.5 PERIPHERAL SETUP
This section is used to configure peripheral features.
AMIBIOS SETUP - PERIPHERAL SETUP
(C) 1996 American Megatrends, Inc. All Rights Reserved
OnBoard FDC Enabled
OnBoard Serial Port1 3F8
OnBoard Serial Port1 IRQ 4
OnBoard Serial Port2 2F8
OnBoard Serial Port2 IRQ 3
OnBoard Parallel Port 378
Parallel Port Mode Normal
EPP Version N/A
Parallel Port IRQ 7
Parallel Port DMA Channel N/A
OnBoard PCI IDE Both
Available Options :
Auto
Disabled
Enabled
ESC:Exit ¡ ф ¡ х :Sel
PgUp/PgDn:Modify
F2/F3:Color
Figure 7-5 BIOS: Peripheral Setup
OnBoard FDC
This option enables the floppy drive controller on the AR-B1462.
OnBoard Serial Port
This option enables the serial port on the AR-B1462.
OnBoard Parallel Port
This option enables the parallel port on the AR-B1462.
Parallel Port Mode
This option specifies the parallel port mode. ECP and EPP are both bidirectional data transfer schemes that
adhere to the IEEE P1284 specifications.
Parallel Port DMA Channel
This option is only available if the setting for the parallel Port Mode option is ECP.
OnBoard PCI IDE/IDE Prefetch
This option specifies the onboard IDE controller channels that will be used.
7.6 AUTO-DETECT HARD DISKS
This option detects the parameters of an IDE hard disk drive, and automatically enters them into the Standard
CMOS Setup screen.
7.7 PASSWORD SETTING
This BIOS Setup has an optional password feature. The system can be configured so that all users must enter a
password every time the system boots or when BIOS Setup is executed. User can set either a Supervisor
password or a User password.