SMC Networks 486DX4 User Manual
Page 45
AR-B1462 User¡
¦s Guide
5-5
Step 6:
There are some items for choice to setup. Please choose the
function key defined. And then the screen shows the hardware setting, press [OK] starts to install.
Step 7:
Completed the installation, user will find two drivers:
(2) WIN 95 Driver
For the WIN95 operating system, user must in the DOS mode decompress the compress file. And then as to the
steps:
Step 1:
Make the new created directory to put the audio drivers.
C:\>MD AUW95
Step 2:
Insert the Utility Disk #1 in the floppy disk drive, and then copy the compress file —WIN95DRV.ZIP,
and the extract program —PKUNZIP.EXE, in the new created directory.
C:\>COPY A:\AUDIO\WIN95DRV.ZIP C:\AUW95
C:\>COPY A:\PKUNZIP.EXE C:\AUW95
Step 3:
Change directory to the new created directory, and extract the compress file.
C:\>CD AUW95
C:\AUW95>PKUNZIP -d WIN95DRV.ZIP
Step 4:
In the WIN95 operation system, please choose the
{CONTROL PANEL}. Please select the
path.
C:\AUW95
Step 5:
And then you can find the
button.
Step 6:
Finally, the installation is completed and user must reboot the system.
(3) WINNT Driver
For the WINNT4.0 and WINNT3.5 operating system, user must in the DOS mode decompress the compress file.
And then the following steps are for WINNT4.0:
Step 1:
Make the new created directory to put the audio drivers.
C:\>MD AUNT40
Step 2:
Insert the Utility Disk #1 in the floppy disk drive, and then copy the compress file —NT40DRV.ZIP,
and the PKUNZIP.EXE program —
, in the new created directory.
C:\>COPY A:\AUNT40\NT40DRV.ZIP C:\AUNT40
C:\>COPY A:\PKUNZIP.EXE C:\AUNT40
Step 3:
Change directory to the new created directory, and extract the compress file.
C:\>CD AUNT40
C:\AUNT40>PKUNZIP -d NT40DRV.ZIP
Step 4:
In the WINNT4.0 operation system, please choose the
{CONTROL PANEL}. Please select the
path.
C:\AUNT40
Step 5:
And then you can find the
button.
Step 6:
Finally, the installation is completed and user must reboot the system.