Sony CMT-CP505MD - Manual (Page 54)

54 GB
CMT-CP505MD 4-241-515-11(1) GB
Listening to audio from a
connected component
Listening to a digital
component such as a digital
satellite receiver, etc.
1
Connect the digital optical cable.
See “Hooking up optional components” on
page 53.
2
Press FUNCTION repeatedly until
“OPTICAL IN” appears.
Start playing the connected component.
Listening to an analog
component such as a
cassette deck
1
Connect audio cords.
See “Hooking up optional components” on
page 53.
2
Press FUNCTION repeatedly until
“ANALOG IN” appears.
Start playing the connected component.
Recording audio from a
connected component
Making a digital recording
from a digital component
The Serial Copy Management system (page 64)
may prevent you from making a digital
recording of certain material. In this case,
connect the component to ANALOG IN jacks
and make an analog recording.
1
Connect the digital optical cable.
2
Start recording manually.
See “Recording on an MD manually” (page
21) or “Recording on a tape manually”
(page 47).
Tips
• You can activate Time Machine Recording (page
22) and Smart Space/Auto Cut functions (page 25).
• You can adjust the recording level when recording
on an MD (page 25).
Making an analog recording
from an analog component
1
Connect the audio cords.
2
Start recording manually.
See “Recording on an MD manually” (page
21) or “Recording on a tape manually”
(page 47).