Sony CMT-CP505MD - Manual (Page 37)

37 GB
MD – Editing
CMT-CP505MD 4-241-515-11(1) GB
6
Press ENTER/YES on the remote again
if the point to be divided is correct.
If the point to be divided is incorrect, press
. or > on the remote to find the point
to be divided, then press ENTER/YES on
the remote.
You can shift the point by 1/86 second
(1 frame) intervals.*
* You can shift the point by 2-frame intervals (in
Monaural mode and LP2 Stereo mode) or by
4-frame intervals (in LP4 Stereo mode).
Tip
To shift the point by minute or second intervals in
step 6 , press m or M on the remote repeatedly to
flash minute, second, or frame indication, then press
. or > on the remote.
Note
If you divide a labelled track (page 28) into two
tracks, only the first track retains the track title.
Example:
1 2
1 2
4 3
3 4 5
A C B
A C B
The new track is not labelled
Combining recorded
tracks
— Combine Function
You can use this function to combine 2 tracks
into a single track. The total number of tracks
decreases by one and all tracks following the
combined ones are renumbered.
Example: Combining track 3 to track 1.
1 2
1 2
4 3
3
A
A C B D
D C B
Example: Combining track 1 to track 4.
1 2
1 2
4 3
3 4
5
A
B C D A
D C B
1
Press MD on the remote.
2
Press MENU/NO on the remote to
display “Edit Menu”.
3
Press . or > on the remote
repeatedly until “Combine?” appears,
then press ENTER/YES on the remote.
Minute Second Frame
continued
Track number
Original
tracks
After
COMBINE
Original
tracks
After
COMBINE