Sony CMT-CP505MD - Manual (Page 33)

33 GB
MD – Editing
CMT-CP505MD 4-241-515-11(1) GB
Erasing recordings
— Erase Function
The MD deck lets you erase unwanted tracks
quickly and easily.
You can restore the erased contents using the
Undo function (page 38) immediately after the
erasing. However, you cannot restore the
erased contents after performing other editings.
Before erasing, make sure if it is all right to
erase the content.
The three options for erasing recordings are:
• Erasing a single track (Track Erase Function)
• Erasing all tracks (All Erase Function)
• Erasing a portion of a track (A-B Erase
Function)
Erasing a single track
— Track Erase Function
When you erase a track, the total number of
tracks on the MD decreases by one and all the
tracks following the erased one are
renumbered.
Example: Erasing track 2.
1 2 3
1 2 3
4
A C D
A C D
B
As the track numbers are renummbered as
above, it is recommended to erase from the
latter tracks when erasing several tracks, so as
not to change the track numberings of unerased
tracks.
1
Press MD on the remote.
2
Press MENU/NO on the remote to
display “Edit Menu”.
3
Press . or > on the remote
repeatedly until “Tr Erase?” appears,
then press ENTER/YES on the remote.
4
Press . or > on the remote
repeatedly until the desired track
number appears.
5
Press ENTER/YES on the remote.
Note
If you erase all the tracks within a group, the group
itself is also erased.
continued
Track number
Erase track 2
Original
tracks
After
ERASE