Sony CMT-CP505MD - Manual (Page 45)

45 GB
Tape – Play / Tape – Recording
CMT-CP505MD 4-241-515-11(1) GB
Recording your favorite
CD tracks on a tape
— CD-TAPE Synchro Recording
You can record a whole CD on a tape.
You can use TYPE I (normal) tape.
1
Load a recordable tape.
2
Load a CD you want to record.
3
Press SYNCHRO repeatedly until
“CD
tTAPE SYNC” appears.
4
Press ENTER/START.
“Press START” flashes.
The tape deck stands by for recording and
the CD player pauses for play.
“N” lights up and the tape deck stands by
for recording.
To start recording from the side facing away
from you, press TAPE nN until
“n” lights up.
5
Press DIRECTION repeatedly until g
appears to record on one side or h (or
j
) to record on both sides.
If you select both sides recording and the
tape reaches the end of the front side part-
way through a track, the entire track is
recorded again from the beginning of the
reverse side. If you start from the reverse
side, recording stops at the end of the
reverse side.
6
Press ENTER/START while “Press
START” flashes.
Recording starts.
When the recording is completed, the CD
player, and the tape deck stop automatically.
To stop recording
Press TAPE x.
Recording on an MD and a tape at
the same time
Insert a recordable MD, then select “DUAL
SYNC” in step 3.
Even if the MD or the tape ends part-way
through the recording, the other continues
recording.
To record only your favorite CD
tracks
You can record only your favorite CD tracks
using the Program Play. Between steps 2 and 3,
perform steps 1 to 5 of “Programming CD
tracks” (page 10).
Tape – Recording