Sharp TINSE0568AWZZ - Manual (Page 81)

81
IM-DR580H
03/10/15 IM-DR580H(E)9.fm IM-DR580H(E) TINSE0568AWZZ
Ref
e
rences
-M
in
iDis
c S
yst
em L
imit
a
ti
o
n
s
-
MiniDisc System Limitations
The unit may have the following symptoms whilst recording or editing. The unit is not out of order.
SYMPTOM LIMITATIONS
"DISC FULL" or "TOC FULL" appears
even though the MiniDisc still has re-
cording time left. More than the limited number of tracks (255) cannot be recorded re-
gardless of the recording time. If the MiniDisc is recorded or edited
repeatedly or it has scratches (recording skips scratched parts), you
may not be able to record the maximum number of tracks described
above. If the total number of character information (disc, group, and
track names) exceeds 1,700, the MD cannot be edited.
The remaining recording time does not
increase even though you erased
tracks. Short tracks (stereo recording: 12 seconds, monaural recording or 2
times long recording: 24 seconds, 4 times long recording: 48 sec-
onds) may not be counted as tracks when displaying the remaining
recording time.
The total of the recorded time and the
remaining time does not match the max-
imum recordable time. One cluster (approximately 2 seconds) is the minimum unit for re-
cording. For example, a 3-second track uses 2 clusters (approximate-
ly 4 seconds). Therefore, the actual recordable time may be shorter
than the displayed time.
(The number of seconds indicates that in the stereo recording mode
(SP). It varies depending on the recording mode.)
Combine function does not work. A MiniDisc on which recording and editing are repeated may not al-
low the combine function.
A track number is created in the middle
of a track. A track number may be created if there are scratches or dust on the
MiniDisc.
Sound skips in fast reverse/forward. If one track is divided and recorded in separate places on a repeat-
edly recorded or edited MiniDisc, sound may skip.
Even if "LP:" is entered at the top of the
name, "LP:" is not displayed. If "LP:" is entered at the top of the 2 times/4 times long recorded track
(LP2/LP4), "LP:" will not be displayed. Enter symbols other than ":"
after "LP".
9