Sharp TINSE0568AWZZ - Manual (Page 24)

24
IM-DR580H
03/10/15 IM-DR580H(E)3.fm IM-DR580H(E) TINSE0568AWZZ
R
ecor
d
in
g
-R
eco
rd
in
g
f
ro
m
a S
tere
o
Sys
tem, et
c
.-
Recording from a Stereo System, etc. (continued)
Notes:
! When recording, it is recommended to use the AC
adaptor and also install the battery. Should the power
failure occur, the power source will be automatically
switched to the battery.
! Changing the volume level whilst recording does not
affect the recording.
! You cannot adjust the bass level whilst recording.
! When recording through the earphone socket, the
recording level depends on the sound volume on
the connected equipment.
! If powered by batteries, some portable CD/MD players
may not send signals from the optical socket. Use the
AC power for digital recording. Also, deactivate sound
skip prevention if installed.
" Playback sound-actuated recording
Recording automatically starts or pauses by detecting
sound from the stereo system (synchronised recording).
1
Connect external equipment to the OPTICAL/
LINE IN socket on the multi-link station (pages
19 - 21).
2
Insert a recordable MiniDisc (page 12).
3
Place the main unit on the multi-link station.
4
Press the REC button.
Recording is paused.
5
Press the MODE/-CHARGE button repeatedly to
select the recording mode (page 33).
6
Start playback on the external equipment and
adjust the recording level by pressing the or
button (page 23).
After the adjustment, leave the connected equip-
ment in the stop mode.
Lit
Flashing
(recording is paused)