Sharp TINSE0568AWZZ - Manual (Page 29)

29
IM-DR580H
03/10/15 IM-DR580H(E)3.fm IM-DR580H(E) TINSE0568AWZZ
R
ecor
d
in
g
-Re
c
o
rd
ing f
rom a
M
ic
rop
hone
-
To interrupt recording
Press the
button whilst recording.
To resume recording, press the button.
The track number will be increased by one each time you
interrupt recording.
To stop recording
Press the button.
TOC information is recorded.
" Adjusting the microphone recording level
Auto adjustment:
! In step 8 above, select "ALC-H" or "ALC-L". The
recording level is adjusted according to the sound
from the microphone. Normally set to "ALC-H".
! If the sound from the microphone is too loud and the
recording level exceeds 0 dB frequently, select "ALC-
L" to lower the level.
! Select "ALC-H" or "ALC-L" so that the maximum
recording level is between -4 dB and 0 dB.
Manual adjustment:
In step 8, select "MANUAL" to adjust the recording level
manually. This is useful at meetings or in conversations.
Notes:
! Sound is interrupted when switching between "MIC L
20 (M-L20)" and "MIC H 21 (M-H21)". This is not a
malfunction.
! Do not increase the recording level excessively.
! The adjusted level is retained after recording is
stopped.
8
Select "ALC-H", "ALC-L" or "MANUAL" by
pressing the or button, and the press the
ENTER/-USB ( ) button.
9
Press the button to start recording.
The record indicator lights up.
Select "MANUAL" and press the or button.
! Adjust the maximum level be-
tween -4 dB and 0 dB.
! Adjustable between "MIC L 00
(M-L00)" and "MIC H 30 (M-
H30)".
-4dB 0dB
3
5 IM-DR580H(E) TINSE0568AWZZ