Sharp TINSE0568AWZZ - Manual (Page 55)

55
IM-DR580H
03/10/15 IM-DR580H(E)6.fm IM-DR580H(E) TINSE0568AWZZ
Gr
oup Reco
rd
ing / Gr
oup Pla
y
bac
k
-R
e
c
o
rd
in
g b
y
Gr
oup-
5
Press the or button repeatedly to select a
group to add tracks to.
NEW GROUP (NEW-Gr):
To create a new group.
GR01, GR02, GR03...:
To add tracks to an existing group. (If the group name
has been recorded, the name will be displayed instead
of "GR01".)
Non GROUP (Non-Gr):
To record tracks as non-group.
" On the remote control, only "NEW-Gr" or "Non-Gr"
can be selected.
" Setting for group recording will not be changed until
a new setting is entered. To cancel settings for all
groups, select "Non GROUP (Non-Gr)".
6
Press the ENTER/-USB ( ) button.
7
Start recording.
Tracks are recorded in the group selected in step 5. To
change the group, stop recording and start over from
step 1.
Recording from a stereo system, etc.
Manual recording (See steps 6 - 9 on pages 22 - 23.)
Synchro recording (See steps 6 - 10 on pages 24 - 25.)
Recording from a Microphone
Manual recording (See steps 6 - 9 on pages 28 - 29.)
Synchro recording (See steps 6 - 12 on page 30.)
Notes:
" When a group-recorded MD is used for recording
or editing on other equipment, malfunction may
occur.
" After group recording, tracks not in the group
(non-grouped tracks) are moved behind the group
and track numbers change.
" If a group-recorded MD is played back with the equip-
ment that does not support the group function, the disc
name will not be displayed correctly and the group
name will not be displayed at all. (Example: 0;BEST//1-
10; )
" You can create up to 99 groups. "GROUP FULL" ap-
pears when you attempt to create more.
Even if the number of groups is 98 or less, "TOC FULL"
may appear indicating no more groups can be created.
" If "? Gr Form" appears, you need to start over. Refer to
"Error Messages" (see page 85).
5