beautypg.com

2 activate jets pumps, 3 selecting desired massage action, 4 air controls – Sundance Spas CAMDEN 780 User Manual

Page 30: 5 multi-colored led light operation, Activate jets pumps, Selecting desired massage action, Air controls, Multi-colored led light operation

background image

Page 26

780 SERIES

9.2

Activate jets Pumps

The

jETS 1 button activates the functions of the main

2-speed jets pump. The first press activates pump 1 in low

speed, the second press activates high speed, and the third

press shuts the pump off. For 2-pump models, the

jETS 2 button

controls jets pump 2 which only operates in high speed. When manually

activated, both pumps automatically turn off in 20 minutes.

9.3

Selecting desired Massage Action

Your Sundance spa is equipped to allow you to customize

the massage action you desire. Each model incorporates a

massage selector that allows you to customize the

massage and performance by diverting water between

various jet systems. Simply turn massage selector to position A

(Combo), B, or C to divert water pressure to various jet groups.

Note: The massage selector is designed to operate in positions A

(Combo), B, and C for optimum performance. It is considered normal for

sound levels within the valve to vary between positions due to the large

amounts of water flowing through it. For optimum filtration benefits, leave

the valve in position A when spa is covered. Select position B or C for

maximum jet performance during spa use.

9.4

Air Controls

Certain jet systems have their own air control. Each control

introduces air into the water lines that supply specific jet

groups. Simply rotate any air control knob clockwise to open, or

counterclockwise to close.

Note: To minimize heat loss, close all air controls when spa is not in

use. Certain jets may not draw air while the jets pump is running in low

speed; this is considered normal.

9.5

Multi-Colored LEd Light Operation

A. Pressing the LIGHT button activates the footwell, waterfall,

and air control LED lights in sequence as follows: High -

Medium - Low - Off.

Anytime the light system has been manually activated, it will

automatically turn off after approximately 2 hours. If at this time you

desire more light operation, simply turn the light system back on.

B. This button offers four light modes for your enjoyment.

Press the LIGHT MODE button to select your favorite

lighting effect as follows:

1

2

C

B

A