Sherwood R-765 - Manual (Page 36)

36
Operating the sleep timer
• The sleep timer allows the system to continue to
operate for a specified period of time before
automatically shutting off.
• To set the receiver to automatically turn off after the
specified period of time.
• Each time this button is pressed, the sleep time
changes as follows:
10 20 30 60 90 OFF
Unit : minutes
• While operating the sleep timer, “SLEEP” lights up.
• When the sleep time is selected, all display panels
of Sherwood components connected by the DIGI
LINK III are dimly lit.
Compressing the dynamic range (Dolby Digital sources only)
• This function compresses the dynamic range of
previously specified parts of the Dolby Digital sound
track(with extremely high volume) to minimize the
difference in volume between the specified and non-
specified parts.
This makes it easy to hear all of the sound track when
watching movies at night at low levels.
• When the digital signals from Dolby Digital program
source are input in available surround mode.
• Each time this button is pressed, the mode changes
and the display scrolls.
DYNR 0.0 : Off
DYNR 0.5 : Low compression
DYNR 1.0 : High compression
• In some Dolby Digital softwares, this function may
not be available.
• Each time this button is pressed, the brightness of
all fluorescent displays of Sherwood components
connected by the DIGI LINK III changes together
as follows;
ON dimmer OFF
• In the display OFF mode, pressing any button will
restore the display ON mode.
Adjusting the brightness of the
fluorescent displays
OTHER FUNCTIONS
DYNAMIC
RANGE
T/V
1 2 3 4
8 7 6 5
9
M1 M2 M3
0 +10
MACRO
T/V
1 2 3 4
8 7 6 5
9
M1 M2 M3
0 +10
MACRO
SLEEP
DIMMER
T/V
1 2 3 4
8 7 6 5
9
M1 M2 M3
0 +10
MACRO
T/V
1 2 3 4
8 7 6 5
9
M1 M2 M3
0 +10
MACRO