Sherwood R-765 - Manual (Page 31)

31
Press the CHANNEL SELECTOR button.
1
Select the desired one between REF.1 and REF.2
2
Calling the memorized levels
or
CHANNEL
SELECTOR
T/V
1 2 3 4
8 7 6 5
9
M1 M2 M3
0 +10
MACRO
T/V
1 2 3 4
8 7 6 5
9
M1 M2 M3
0 +10
MACRO
CH.SEL
• “REF.1” (or “USER”, etc.) is displayed for
several seconds.
• If the channel level mode display disappears,
press the CHANNEL SELECTOR button
again.
• Then the current channel levels are changed to
the memorized ones.
or
ADJUST
T/V
1 2 3 4
8 7 6 5
9
M1 M2 M3
0 +10
MACRO
T/V T/V
1 2 3 4
8 7 6 5
9
M1 M2 M3
0 +10
MACRO
CH/LEVEL
Downmixing into 2 front channels
• To cancel the 2 - CH downmix mode, select the
desired surround mode with the DSP MODE (<) or
(>) button.
• When the playback of the source on the player is
stopped, interrupted, etc., the 2 - CH downmix mode
is not canceled even though “ ST” and the DTS or
Dolby Digital indicators go off.
• If headphones are plugged in and the SPEAKER
button is set to off while the digital signals from the
DTS or Dolby Digital program sources are being
input, it will enter the 2-CH downmix mode
automatically and if the headphones are unplugged
and the SPEAKER button is set to on in the 2-CH
downmix mode, it will return to the previous mode.
• Allows the multi - channel DTS or Dolby Digital
signal to be reproduced through only two speakers or
through headphones.
• When the digital signals from the DTS or Dolby
Digital program sources are input in available
surround mode, press the STEREO button.
• “ST” indicator lights up and “2 CH DOWNMIX” is
scrolled, meaning it enters the 2-CH downmix mode,
and then the discrete multi-channels(except LFE) are
mixed down into 2 front channels.
or
UND MODE
STEREO
T/V
1 2 3 4
8 7 6 5
9
M1 M2 M3
0 +10
MACRO
T/V
1 2 3 4
8 7 6 5
9
M1 M2 M3
0 +10
MACRO
STEREO