Sherwood R-765 - Manual (Page 29)

29
Adjusting the current channel level
Press the CHANNEL SELECTOR button.
1
or
CHANNEL
SELECTOR
Enter the test tone mode.
1
• The volume level of each channel can be adjusted easily with the test tone function.
Note : When the 7 CH DIRECT is selected as an input source, the SPEAKER button is set to off or it is in the stereo
mode, the test tone function does not work.
Adjusting each channel level with test tone
• The test tone will be heard from the speaker of each
channel for 2 seconds as follows:
FL C FR SR SB SL
SW
• “REF. 1”(or “USER”, etc.) is displayed and each
time this button is pressed, the corresponding channel
is selected and displayed for several seconds as
follows:
• You can adjust the LFE level for Dolby Digital or DTS program source that includes LFE signal.
• When it is in the stereo or Dolby Virtual mode or the speaker setting is “N”, center, surround L/R,
surround back or subwoofer channel will not be selected.
• When the SPEAKER button is set to off, only the front L/R channel can be selected.
• After adjusting each channel level with test tone, adjust the channel levels either according to the program sources
or to suit your tastes.
At each channel, adjust the level as desired
until the sound level of each speaker is heard
to be equally loud.
2
Cancel the test tone function.
3
• You can select the desired channel and adjust its level with
repeating the steps 1 and 2 in “Adjusting each channel
level” procedure.
or
ADJUST
FL C FR SR SB
( DTS L DD L ) SW SL
Front Left Center Front Right Surround Surround Surround
Right Back Left
Subwoofer
T/V
1 2 3 4
8 7 6 5
9
M1 M2 M3
0 +10
MACRO
T/V
1 2 3 4
8 7 6 5
9
M1 M2 M3
0 +10
MACRO
T.TONE
T/V
1 2 3 4
8 7 6 5
9
M1 M2 M3
0 +10
MACRO
T/V T/V
1 2 3 4
8 7 6 5
9
M1 M2 M3
0 +10
MACRO
CH/LEVEL
T/V
1 2 3 4
8 7 6 5
9
M1 M2 M3
0 +10
MACRO
T/V
1 2 3 4
8 7 6 5
9
M1 M2 M3
0 +10
MACRO
T.TONE
T/V
1 2 3 4
8 7 6 5
9
M1 M2 M3
0 +10
MACRO
T/V
1 2 3 4
8 7 6 5
9
M1 M2 M3
0 +10
MACRO
CH.SEL
• When the speaker setting is “N”, the test tone of the
corresponding channel is not available.
DTS LFE Dolby Digital LFE
( ) : impossible when the analog input is selected as
signal input.