Sherwood R-765 - Manual (Page 19)

19
LISTENING TO A PROGRAM SOURCE
Operations
Before operation
Select the desired input source.
3
• Enter the standby mode.
• The STANDBY indicator lights up.
When the power operation switch
is in the OFF or STANDBY state,
the apparatus is still connected on
some AC line voltages.
Please be sure to unplug the cord when you leave
home for, say, a vacation.
• To switch the power off, push the POWER switch again.
• Then the power is cut off and the STANDBY indicator
goes off.
• Then the SPEAKER indicator lights up and the sound
can be heard from the speakers connected to the
speaker terminals.
• When using the headphone for private listening, press
the SPEAKER button again to switch the speakers off.
• Each time the “AUDIO” button on the front panel is
pressed, the input source changes as follows;
TUNER CD TAPE AUX
(frequency display)
• Each time the “VIDEO” button on the front panel is
pressed, the input source changes as follows;
VIDEO 1 VIDEO 2 VIDEO 3
When selecting the 7 CH DIRECT as desired,
• “7-DIRECT” is displayed and the 7 or 6 separate
analog signals from the component connected to this
input can be controlled only by channel level(s) and
volume depending on the surround back speaker
setting.
• Press the 7 CH DIRECT button or select the desired
input source to cancel the 7 CH direct function.
• These analog signals can be heard only, not recorded.
Switch the speakers on.
2
POWER
ON/ OFF
or
INPUT SELECTOR
VIDEO AUDIO
ON/OFF
SPEAKER
or
INPUT SELECTOR
7CH DIRECT
• Note : Before operating this receiver with the supplied remote control, refer to “Universal Remote Controls” on page 13 for
details about operation.
• In the operating mode, if the STANDBY button on the
remote control is pressed, the receiver is turned off and
enters the standby mode.
• In the standby mode, if the INPUT SELECTOR button
is pressed, the receiver is turned on automatically and
the desired input is selected.
In the standby mode, turn the power on.
1
ON/STANDBY
STANDBY
or
T/V
1 2 3 4
8 7 6 5
9
M1 M2 M3
0 +10
MACRO
T/V
1 2 3 4
8 7 6 5
9
M1 M2 M3
0 +10
MACRO
POWER ON
T/V
1 2 3 4
8 7 6 5
9
M1 M2 M3
0 +10
MACRO
T/V
1 2 3 4
8 7 6 5
9
M1 M2 M3
0 +10
MACRO
TUNER
CD
AUX
TAPE
VIDEO 1
VIDEO 2
VIDEO 3
T/V
1 2 3 4
8 7 6 5
9
M1 M2 M3
0 +10
MACRO
T/V
1 2 3 4
8 7 6 5
9
M1 M1 M2 M2 M3 M3
0 +10
MACRO MACRO
7 CH IN