Symmetricom EDGE CLOCK 1000 - Manual (Page 99)

097-58001-02 Revision G – April 2008 TimeProvider User’s Guide 99
Chapter 4 Provisioning the TimeProvider
Managing the User List
Changing the Current User’s Password
The ED-PID command changes the specified user’s password.
ED-PID:[]:[]:[]::,;
This command has a default access level of USER.
Sample Command
ED-PID::TECHNICIAN:TS1000::TECH01!,#Tech02;
This command changes the current user’s password from TECH01! to #Tech02.
Autonomous Message
TP-SSU 03-10-24 10:30:01
A 1173 REPT EVT
“IMC:NA,PIDCHG,NSA,03-10-24 10-30-01:\”USER PASSWORD HAS
CHANGED\””
;
Displaying a User’s Access Level
Use the following TL1 command to display the access level for a specified user or
for all users.
RTRV-USER-SECU::[]:[];
This command always has an access level of SECURITY.
Keyword Value Description
Up to 20 case-insensitive
alphanumeric characters
Must match existing value or
DENY is issued for the command Old password for the
specified user
Up to 20 case-sensitive
characters New password for the
specified user
Parameter Description
Assigned user name. Displays the access level of the specified
user.
null Displays the access level for all assigned user names.