Symmetricom EDGE CLOCK 1000 - Manual (Page 85)

097-58001-02 Revision G – April 2008 TimeProvider User’s Guide 85
Chapter 4 Provisioning the TimeProvider
This chapter describes the procedures for provisioning the TimeProvider and the
available Expansion Panel. Use the procedures in this chapter after you have
installed the TimeProvider (see
Chapter 3, Installing the TimeProvider ).
For detailed information on the syntax and format for each available TL1 command,
refer to the TimeProvider TL1 Reference Guide, part number 097-58001-01.
In This Chapter
TL1 Overview
Starting the TimeProvider for the First Time
Setting Communications Parameters
Defining the Security Parameters
Managing the User List
Using SynCraft
Provisioning the IOC
Provisioning the Input Reference
Provisioning the Outputs
Provisioning NTP Parameters
Provisioning Alarms
Provisioning SNMP Parameters
System Commands
Saving Provisioning Data