Symmetricom EDGE CLOCK 1000 - Manual (Page 167)

097-58001-02 Revision G – April 2008 TimeProvider User’s Guide 167
Chapter 6 Maintaining and Troubleshooting the TimeProvider
Troubleshooting the TimeProvider
Troubleshooting the TimeProvider
Using Events to Troubleshoot
You can provision most events to generate an alarm; alarm levels include Critical
(CR), Major (MJ), Minor (MN), Event, (NA), and Not Reported (NR).
Table 6-5 lists
the event ID and the description of events for the IMC, IOC, and IOC Input.
Table 6-5. Event Codes
Event ID
Keyword
Description
AID
TYPE
Default Value/
Keyword
Description of Values
IMC Event Codes
ACCLVL The user’s system
access level has
changed in the
database EQPT SECURITY
(when no users
have been
assigned to the
system) NONE – User has access to
all commands; no Security
has been assigned
USER – User can access
User-level commands
ADMIN – User can access
Admin-level commands
SECURITY – User can
access all commands
ACO Audio alarm has been
deactivated EQPT N/A N/A
ALMCHG The IMC alarm
parameters have
changed EQPT N/A Alarm keywords and values
are listed in
Table 6-7 . When
the user changes a value, the
ALMCHG event is generated
and contains the keyword and
value
AOMERGE Enable/Disable
autonomous event
generation for the
current session EQPT ENABLE ENABLE – Autonomous
messages are displayed in
the current session
DISABLE – Autonomous
messages are not displayed in
the current session
BAUD The IMC serial port
baud rate has
changed EQPT 9600 2400 | 9600 | 19200 | 28800 |
38400 | 57600
CMDCHG The command access
level has changed EQPT ACCLVL-USER NONE | USER | ADMIN |
SECURITY