Symmetricom EDGE CLOCK 1000 - Manual (Page 100)

Chapter 4 Provisioning the TimeProvider
Managing the User List
100 TimeProvider User’s Guide 097-58001-02 Revision G – April 2008
The response format is:
^^^sid^date^time
M ^ctag^COMPLD
^^^”username,access”
^^^”username,access”
.
.
^^^”username,access”
;
Sample Command
RTRV-USER-SECU::TS1000;
Normal Response
TP-SSU 03-10-24 10:31:31
M TS1000 COMPLD
“TECHNICIAN,USER”
“DEPTHEAD,SECURITY”
“DAVID,ADMIN”
;
Editing a User’s Access Level
Use the following TL1 command to change the access level for a specified user.
ED-USER-SECU:[]::[]::=;
This command always has an access level of SECURITY.
Sample Command
ED-USER-SECU::TECHNICIAN:TS1000::ACCLVL=ADMIN;
This command changes the access level for the TECHNICIAN user to ADMIN.
Response Value Description
Up to 20 case- insensitive characters Assigned user name
NONE | USER | ADMIN | SECURITY Access level
Parameter Description
Up to 20 case-insensitive characters Assigned user name
ACCLVL NONE | USER | ADMIN | SECURITY New access level for
the specified user