Symmetricom EDGE CLOCK 1000 - Manual (Page 142)

Chapter 4 Provisioning the TimeProvider
Saving Provisioning Data
142 TimeProvider User’s Guide 097-58001-02 Revision G – April 2008
Setting the Input State , on page 108 Input mode, PRS
Input mode, INP1
Input mode, INP2
Input mode, GPS
Setting the GPS Parameters , on page 109 GPS Mode
GPS Position
GPS Elevmask
Setting the Input Frequency , on page 110 Frequency, PRS
Setting the Input Frame Type , on page
110
Frame type, INP1
Frame type, INP2
Controlling Automatic Reference
Switching
, on page 111
Reference mode
Setting the Input Quality Level , on page
112
QLEVEL, PRS
QLEVEL, INP1
QLEVEL, INP2
QLEVEL, GPS
Setting the Input Priority Level , on page
113
PRIORITY, PRS
PRIORITY, INP1
PRIORITY, INP2
PRIORITY, GPS
Manually Selecting the Reference , on
page 114
INPREF
Provisioning the SSM , on page 115 SSMBIT, INP1
SSMBIT, INP2
Enabling CRC4 , on page 116 CRCENA, INP1
CRCENA, INP2
Enabling and Disabling the Outputs , on
page 119
OUTSTATE, OUTA
OUTSTATE, OUTB
OUTSTATE, OUTC
OUTSTATE, OUTD
Table 4-4. Provisioning Record (Continued)
Section Parameter User-Defined Value