Savin DSc332 - Manual (Page 94)

Copying
80
2
Note
❒ You can enter between 1 and
9999 for the original page num-
ber from which to start printing.
❒ To change the number entered,
press [Clear] or the {{{{Clear/Stop}}}}
key, and then enter a new num-
ber.
CCCC
Press [Numbering from/to], then en-
ter the number of page from
which to start numbering using
the number keys, and then press
the
{{{{#}}}} key.
DDDD
Press [Last Number], then enter the
number of page at which to stop
numbering using the number
keys, and then press the
{{{{#}}}} key.
Proceed to step
E when not chang-
ing.
Note
❒ To print on the last page, press
[to the end] .
❒ The last number is the last page
number printed. For example, if
[Total Pages]
is ten, if you want
to print seven pages up to page
7, enter [7] as the [Last Number].
❒ Normally, you do not need to
enter this number.
EEEE
Press [Total Pages], enter the total
number of original pages using
the number keys, and then press
the
{{{{#}}}} key.
FFFF
When page designation is com-
plete, press [OK].
Note
❒ To change the settings after
pressing [OK], press [Change],
and then enter the numbers
again.
GGGG
Press [OK] 3 times.
If you selected (1-1, 1-2,…)
AAAA
Press [Change] on the right hand
side.
BBBB
Press [First Printing Page], and then
enter the original page number
from which to start printing using
number keys, and then press the
{{{{#}}}} key.
Note
❒ To change the number entered,
press [Clear] or the
{{{{Clear/Stop}}}}
key, and then enter a new num-
ber.
CCCC
Press [First Chapter No.], enter the
chapter number from which to
start numbering using the num-
ber keys, and then press the
{{{{#}}}}
key.
Note
❒ You can enter between 1 and
9999 for the chapter number
from which to start numbering.
DDDD
Press [Numbering from/to], and then
en ter the p ag e nu mb er fr om
which to start numbering using
the number keys, and then press
the
{{{{#}}}} key.
EEEE
When page designation is com-
plete, press [OK].
FFFF
Press [OK] 3 times.
0827JupiterC1_Copy_EN_F1_FM.book Page 80 Thursday, September 4, 2003 5:06 PM