Savin DSc332 - Manual (Page 28)

Placing Originals
14
1
AAAA
Press [Special Original].
BBBB
Select the original orientation.
Standard orientation
A Make sure is selected.
90
° turn
A Place the original in the land-
scape orientation, and then
press .
CCCC
Press [OK].
Placing Originals on the
Exposure Glass
AAAA
Lift the exposure glass cover or
the ADF.
Important
❒ Do not lift the exposure glass
cover or the ADF forcefully.
O t h e r w is e , t h e A D F c o v e r
might open or be damaged.
Note
❒ Be sure to lift the exposure glass
cover or ADF more than 30
°.
Otherwise, the size of the origi-
nal might not be detected cor-
rectly.
BBBB
Place the original face down on
the exposure glass. It should be
aligned with the rear left corner.
1. Positioning mark
2. Scale
Note
❒ Start with the first page to be
copied.
CCCC
Lower the exposure glass cover or
ADF.
ZLFH140E
0827JupiterC1_Copy_EN_F1_FM.book Page 14 Thursday, September 4, 2003 5:06 PM