Savin DSc332 - Manual (Page 148)

Specifications
134
6
• When using [Top Slant], [Left 2] or [Top 2] with Combine, Double copies or
Auto Reduce/Enlarge function, “ Blank part will appear. Check ori-
entation. ”message may appear depending on the orientation of origi-
nals and paper you placed. In this case, change the paper orientation.
• When [Left 2] or [Top 2] is selected, the following settings are useful to rotate
images appropriately:
• Auto Reduce/Enlarge or Auto Paper Select
• With image rotation in Auto Tray Switching of User Tools
• If you select Saddle Stitch function with the booklet finisher, the machine
staples and folds the paper in the center, then delivers the paper folded.
• If you select Saddle Stitch function in Magazine mode, the machine staples
the paper, and folds it like a book, then delivers the paper folded.
❖ ❖ ❖ ❖ Punch
• When using Punch and Combine, Double Copies, or Auto Reduce/En-
large, the message “ Blank part will appear. Check orientation. ”
may appear because of the orientation of the original and the copy paper.
If this occurs, change the orientation of the copy paper.
• Since punch holes are made in each copy, the punch hole positions vary slightly.
• Punchable paper sizes are as follows:
• The punch hole positions change according to the orientation of the paper
selected.
2 tray finisher
Punch kit type
2 & 4 holes type 2 holes L A3-B5 JIS, 11" × 17"
K A4-A5, 8 1 /
2
" × 11"
4 holes L A3, B4 JIS, 11" × 17"
K A4, B5 JIS, 8 1 /
2
" × 11"
4 holes type 4 holes L A3-B5 JIS, 11" × 17"
K A4-A5, 8 1 /
2
" × 11"
2 & 3 holes type 2 holes L A3-B5 JIS, 11" × 17"
K A4-A5, 8 1 /
2
" × 11"
3 holes L A3, B4 JIS, 11" × 17"
K A4, B5 JIS, 8 1 /
2
" × 11"
Booklet finisher
Punch kit type
2 holes type 2 holes L A3, A4, B5 JIS, 11" Ч 17", 8 1 /
2
" Ч 14", 8 1 /
2
" Ч 11"
K A4, 8 1 /
2
" × 11"
4 holes type 4 holes L A3, A4, B4 JIS, B5 JIS, 11" Ч 17", 8 1 /
2
" Ч 14", 8 1 /
2
" Ч 11"
K A4, B5 JIS, 8 1 /
2
" × 11"
0827JupiterC1_Copy_EN_F1_FM.book Page 134 Thursday, September 4, 2003 5:06 PM