Savin DSc332 - Manual (Page 59)

Copier Functions
45
2
Sample copy
You can use this function to check
copy settings before making a long
copy run.
Note
❒ This function can be used only
when the Sort function is turned
on.
AAAA
Select Sort and any other neces-
sary functions, and then place the
originals.
BBBB
Press the
{{{{Sample Copy}}}} key.
One copy set is delivered as a sam-
ple.
CCCC
If the sample is acceptable, press
[Print]
.
The specified number of copies is
made, minus one for the proof
copy.
Note
❒ If you press [Suspend] after
checking the results, return to
step
A to adjust the copy set-
tings as necessary. You can
change the settings for Staple,
Duplex, Copy Orientation,
Stamp, Margin Adjust, and
Cover/Slip Sheet. However, de-
pending on the combination of
functions, you may not be able
to change certain settings.
Changing the number of sets
You can change the number of copy
sets during copying.
Note
❒ This function can only be used
when the Sort function is turned
on.
AAAA
While "Copying" is displayed,
press the
{{{{Clear/Stop}}}} key.
BBBB
Press [Change Quantity].
CCCC
Enter the number of copy sets us-
ing the number keys, and then
press the
{{{{#}}}} key.
Note
❒ The number of sets you can en-
ter differs depending on when
the
{{{{Clear/Stop}}}} key is pressed.
DDDD
Press [Continue].
Copying starts again.
0827JupiterC1_Copy_EN_F1_FM.book Page 45 Thursday, September 4, 2003 5:06 PM