Savin DSc332 - Manual (Page 43)

Color Functions
29
2
Color Functions
Selecting a Color Mode
Select a Color mode that best suits
your originals and copying require-
ments.
Reference
For color images, see p.iii “What
You Can Do with This Machine
ments>”
The following basic functions are ex-
plained in this section.
❖ ❖ ❖ ❖ Auto Color Selection
Judges the color of the original au-
tomatically, and copies either in
full color or black/white.
❖ ❖ ❖ ❖ Full Color Copy
Copies by overlaying yellow, ma-
genta, cyan, and black.
❖ ❖ ❖ ❖ Black/White Copy
Copies in black regardless of the
color of the original.
❖ ❖ ❖ ❖ Single Color Copy
Copies in one designated color.
Note
❒ Yellow, magenta, and cyan will
be copied with one toner color,
but beige, orange, red, light
green, pink, green, marine blue,
blue and purple uses 2 toner
colors to copy.
❖ ❖ ❖ ❖ Two Color Copy
• Two Color Copy (Normal)
Copies black and other parts in
two specified colors.
Note
❒ You can select from basic col-
ors and registered colors.
• Two Color Copy (Red & Black)
Copies the red part in red, and
all the other parts in black or
white.
Note
❒ When the width of the color
is set to “Wider”, colors close
to orange and purple will be
recognized as red. This ad-
justment will be valid in
“Erase Color” and “Convert
Colors”. See p.125 “Color
Sensitivity”
AAAA
Select the type of color key.
0827JupiterC1_Copy_EN_F1_FM.book Page 29 Thursday, September 4, 2003 5:06 PM