Savin DSc332 - Manual (Page 113)

If You Cannot Make Copies As You Want
99
4
❖ ❖ ❖ ❖ Edit
❖ ❖ ❖ ❖ Stamp
Problem Causes Solutions
When using the Double
Copies function, parts of
the original image are not
copied. The original and copy pa-
per combination is not cor-
rect. Select A3 L for A4 K originals and
A4 for A5 originals. See p.64 “Dou-
ble Copies”.
When using the Border,
Center, or Center/Border
function, parts of the origi-
nal image are not copied. You set a wide erased mar-
gin. Make the margin width narrower.
You can adjust it between 2-99 mm.
See “Erase Border Width” and
“Erase Center Width” in p.117 “Edit
1 /
2
”.
Place originals correctly.
Originals are not scanned
correctly. Place originals correctly.
When using the Margin
Adjustment function, parts
of the original image are
not copied. You set a wide erased mar-
gin. Set a narrower margin with User
Tools. You can set the width be-
tween 0–30 mm (0"–1.2"). See p.117
“Front Margin: Left/Right”, p.117
“Front Margin: Top/Bottom”, p.117
“Back Margin: Left/Right”, and
p.117 “Back Margin: Top/Bottom”.
There is a lack of margin
space on the opposite side
of the binding position.
When using the Image Re-
peat function, the original
image is not copied repeat-
edly. You selected copy paper of
the same size as the origi-
nals, or you did not select a
proper reproduction ratio. Select copy paper of a larger size
than the originals.
Select a proper reproduction ratio.
Problem Causes Solutions
The stamp position is
wrong. The paper orientation is
wrong. Check the paper orientation and
stamp position.
0827JupiterC1_Copy_EN_F1_FM.book Page 99 Thursday, September 4, 2003 5:06 PM