Directional size magnification (inch) – Savin DSc332 User Manual
Page 56
Copying
42
2
BBBB
Press [Specifd. Ratio].
CCCC
Press [Direct. Mag.%].
To enter the ratio using the
number keys
A Press [Horizontal].
B Enter the ratio using the num-
ber keys, and then press [#].
C Press [Vertical].
D Enter the ratio using the num-
ber keys, and then press [#].
E Press [OK].
To specify a ratio using [
n
n
n
n] and
[
o
o
o
o]
A Press [With n
n
n
no
o
o
o].
B Press [Horizontal].
C Adjust the ratio using [n
n
n
n] or
[
o
o
o
o].
Note
❒ Pressing [n
n
n
n] or [o
o
o
o] changes
the ratio in increments of 1%.
Pressing and holding down
[
n
n
n
n] or [o
o
o
o] changes it in in-
crements of 10%.
❒ If you have incorrectly en-
tered the ratio, readjust it us-
ing [
n
n
n
n] or [o
o
o
o].
D Press [Vertical].
E Adjust the ratio using [n
n
n
n] or
[
o
o
o
o].
F Press [OK].
DDDD
Press [OK].
EEEE
Place the originals, and then press
the
{{{{Start}}}} key.
Directional Size Magnification
(Inch)
A suitable reproduction ratio is auto-
matically selected when you enter the
horizontal and vertical lengths of the
original and copy image you require.
1.
Horizontal original size
2.
Vertical original size
3.
Horizontal copy size
4.
Vertical copy size
Preparation
Specify the vertical and horizontal
size of the original and that of the
copy, as shown.
Note
❒ You can enter sizes within the fol-
lowing ranges:
Metric
version
Vertical: 1–999 mm
(increments of 1 mm)
Horizontal: 1–999 mm
(increments of 1 mm)
Inch
version
0.1"–99.9" (increments of 0.1")
CP2M01EE
0827JupiterC1_Copy_EN_F1_FM.book Page 42 Thursday, September 4, 2003 5:06 PM