Savin DSc332 - Manual (Page 46)

Copying
32
2
Erase Color
You can erase a certain color in the
image of the original.
Note
❒ It is possible to select up to 4 colors.
❒ The width of the color to be delet-
ed can be adjusted in 5 levels. If the
color width is set to “Wider” and
red has been specified, colors
which are close to magenta or or-
ange, will also be deleted. The col-
or width can be adjusted in the
“User Tools”. See p.125 “Color
Sensitivity”
AAAA
Press [Edit/Color Creation].
BBBB
Press [Color Creation].
CCCC
Press [Erase Color].
DDDD
Select the color to be erased.
Note
❒ You can cancel the selection by
pressing the selected (highlight-
ed) key.
❒ You can erase 4 colors at once.
EEEE
Press [OK] after selecting all the
colors to be deleted.
FFFF
Press [OK] twice.
GGGG
Place the originals, and then press
the
{{{{Start}}}} key.
Color Background
Copies by adding a color in the whole
page.
Note
❒ Since the Color Background func-
tion overprints the entire original,
the color of the image may change.
AAAA
Press [Edit/Color Creation].
BBBB
Press [Color Creation].
CCCC
Press [Color Background].
DDDD
Select the background color, then
press [OK].
Note
❒ You can adjust the density of
each color in 4 levels.
❒ You can cancel the selection by
pressing the selected (highlight-
ed) key.
Selecting from the [User Color]
A Press [User Color].
B Select a registered color, and
then press [OK].
EEEE
Press [OK] twice.
FFFF
Place the originals, and then press
the
{{{{Start}}}} key.
0827JupiterC1_Copy_EN_F1_FM.book Page 32 Thursday, September 4, 2003 5:06 PM