Siemens 5881 - Manual (Page 79)

SIEMENS 5881 Broadband Internet Router
User’s Guide Chapter 6 Security Setup
IKE/IPSec Configuration
SIEMENS 73
10. In Destination Subnet Mask, enter the subnet mask of the remote private network to which your router
will connect using this policy.
11. In Source Port, enter the port that will be the source of TCP/UDP traffic under this policy. You can specify
All ports, a port number, or an IP application associated with a particular port. Because port numbers are
TCP and UDP specific, a port filter is effective only when the protocol filter is TCP or UDP.
12. In Destination Port, enter the port that will be the destination of TCP/UDP traffic under this policy. You
can specify All ports, a port number, or an IP application associated with a particular port.
13. From the Default Tunnel drop-down menu, select the tunnel you want to search last. Only one tunnel can
be specified as the default tunnel.
14. Click Apply.