Siemens 5881 - Manual (Page 10)

SIEMENS 5881 Broadband Internet Router
User’s Guide Chapter 1 Product Specifications
Software Specifications
SIEMENS 4
Software Specifications
Bridging
• Transparent bridging including Spanning Tree
protocol (IEEE 802.1D)
• Bridge filters
Configuration Management
• Easy Setup Web Management Interface
• Microsoft ® Windows configuration management
via SNMP
• TFTP download/upload of new software and
configuration files
• Performance monitor
• Dynamic event and history logging
• Administration through HTTP, SNMP, Telnet or
VT100 terminal
• Network boot uses the BootP server (RFC
2131, RFC 2132)
Dial Backup
• Failover to modem on console port
• Web Management Interface
• User selectable fail/restore criteria
• Supports L2TP and IPSec tunnel failover
• Optional modem connector (DB9 or DB25)
Routing
• TCP/IP with RIP1 (RFC 1058), RIP1 compatible
and RIP2 (RFC 1389) or static routing on the
LAN or WAN
• Novell ® IPX with RIP/SAP (RFC 1552)
• DHCP client (RFC 2132)
• DHCP server - Automatic assignment of IP
address, mask, default gateway and DNS
server addresses to workstations (RFC 2131,
2132)
• DHCP relay agent (RFC 1542)
• DNS relay
• Multiple subnets on LAN
• Virtual routing
• Virtual Router Redundancy Protocol (RFC
2338)
Differentiated Services - Quality of
Service provisioning
• Weighted Fair Queuing (WFQ)
• Differentiated Services (DiffServ)
IP Address Translation
• Network renumbering (RFC 1631)
• Network Address Translation (NAT/PAT)
• LAN servers supported with NAT
• Support for NAT inside an IPSec tunnel
PPP (RFC 1661)
• PPP over Ethernet (RFC 2516)