Siemens 5881 - Manual (Page 31)

SIEMENS 5881 Broadband Internet Router
User’s Guide Chapter 4 User Setup
User Management
SIEMENS 25
Secure Mode Configuration
You can enable secure mode to control whether an interface is trusted or untrusted. To configure Secure
Mode:
1. Click Secure Mode Configuration on the left navigation pane of the User Management page. This
displays the Secure Mode Configuration page.
2. Do one of the following for Secure Mode:
• Click the box next to Enabled so a check mark appears. This enables secure mode.
• Click the box next to Enabled so there is no check mark. This disables secure mode.
3. If you enabled secure mode, select one of the following for Ethernet 0 Interface and Ethernet 1
Interface:
• Trusted:
A trusted interface does not have to come over an encrypted tunnel.
• Untrusted:
An untrusted interface must come over an encrypted tunnel, such as SSH or telnet-over-IPSec.