SMC Networks Reed Switch Solid State Switches - Manual (Page 10)

( ): dimensions for D-A93.
D-A90V, D-A93V, D-A96V
Auto Switch Specifications
Grommet
Electrical entry: In-line
PLC: Abbreviation of Programmable Logic Controller
D-A90, D-A90V (Without indicator light)
Auto switch model
Applicable load
Load voltage
Maximum load current
Contact protection circuit
Internal resistance
D-A93, D-A93V, D-A96, D-A96V (With indicator light)
Auto switch model
Applicable load
Load voltage
Load current range and
Maximum load current
Contact protection circuit
Internal voltage drop
Indicator light
D-A90, D-A90V
IC circuit, Relay, PLC
24 V or less
50 mA
None
1 Ω or less (Including lead wire length of 3 m)
48 V or less
40 mA
100 V or less
20 mA
D-A93, D-A93V
Relay, PLC
24 VDC
5 to 40 mA
None
D-A93 —— 2.4 V or less (up to 20 mA)/3 V or less (up to 40 mA)
D-A93V —— 2.7 V or less
Red LED lights when ON.
100 VAC
5 to 20 mA
D-A96, D-A96V
IC circuit
4 to 8 VDC
20 mA
0.8 V or less
AC
DC AC
DC AC
DC
Note 1) Operating load is an induction load.
Note 2) Wiring to the load is 5 m or longer.
Note 3) Load voltage is 100 VAC.
Use the contact protection box in any of the
above listed situations. The contact point life may
decrease. (Refer to page 12-13-5 for contact
protection box.)
1. Fix the switch with appropriate screw
installed on the switch body. If using other
screws, switch may be damaged.
Model
Lead wire length: 0.5 m
Lead wire length: 3 m
D-A90
6
30
D-A90V
6
30
D-A93
6
30
D-A93V
6
30
D-A96
8
41
D-A96V
8
41
(g)
Weight
Auto Switch Internal Circuit
Colors of lead wire inside ( ) are the
ones before conformed to IEC standard.
D-A90V
D-A93V
D-A96V
Reed switch
OUT(±)
Brown
ȁ
OUT (±)
Blue
Blue (Black)
LED
Reed switch
Resistor
Zener diode
Brown (Red)
OUT ( + )
Brown
ȁ
OUT ( – )
Blue
LED
Reed switch
Resistor
Reverse
current
prevention
diode OUT
Black
DC ( + )
Brown
DC ( – )
Blue
Load
( + )
( – )
DC
power supply
Dimensions
D-A90, D-A93, D-A96
(3)
• Lead wire
D-A90(V)/D-A93(V)—Oil resistant vinyl heavy-duty cord, ø2.7, 0.18 mm 2 x 2 cores (Brown, Blue), 0.5 m
D-A96(V)—Oil resistant vinyl heavy-duty cord, ø2.7, 0.15 mm 2 x 3 cores (Brown, Black, Blue), 0.5 m
Note 1) Regarding the common specifications of the reed switches, refer to page 12-13-5.
Note 2) Regarding the lead wire length, refer to page 12-13-5.
Note 3) Under 5 mA, the strength of the indicator light is poor. In some cases, visibility of the indicator
light will not be possible where the output signal is less than 2.5 mA. However, there is no
problem in terms of contact output, when an output signal exceeds 1 mA or more.
M2.5 x 4 l
Slotted set screw
Indicator light
D-A90 without indicator light
Indicator light
D-A90V without indicator light
M2.5 x 4 l Slotted set screw
Most sensitive position
Reed Switch
Direct Mounting Style
D-A90(V)/D-A93(V)/D-A96(V)
Contact
protection
box
CD-P11
CD-P12
Contact
protection
box
CD-P11
CD-P12
Most sensitive
position
Precautions
Caution
For details about certified products
conforming to international standards,
visit us at www.smcworld.com.
12-13-10
1st
12_13_D-.qxd 04.7.6 18:02 Page 13-10
10