Sanyo PLC HF15000L - Manual (Page 74)

74
Maintenance and Care
Filter counter
Be sure to reset the Filter counter after replacing the filters.
Press the MENU button to display the On-Screen
Menu. Use the Point ed buttons to select Setting and
then press the Point 8 or the SELECT button.
Use the Point ed buttons to select Filter counter and
then press the SELECT button. Use the Point ed
buttons to select Filter counter reset and then press
the SELECT button. Filter counter Reset? appears.
Select Yes to continue.
1
Filter counter Reset?
appears .
Select Yes, then another
confirmation box
appears.
Select Yes again to reset
the Filter counter.
Another confirmation dialog box appears, select Yes to
reset the Filter counter.
Resetting the Filter Counter
✔ Note:
• Whenever the filters have been replaced, reset the Filter
counter, but if the filters were not replaced, do not reset
the filter counter, as this could cause product damage.