Settings – Sanyo PLC HF15000L User Manual

Page 66

Use the Point

buttons to adjust the Projector ID.

Projector ID ... 1 - 999. (Factory default setting : Projector ID

This feature allows users to set serial communication

configuration (Projector ID) when several projectors are

connected via the RS-232C terminal (serial port) of the

projector.

Shutter function is available to block out light to the screen,

so that the screen can be used for the other presenters.

Prohibits the shutter operation from the remote control and

the projector's side control.

Remote control . . . Selecting "On" prohibits the shutter

operation from the remote control.

Projector . . . . . . . . Selecting "On" prohibits the shutter

operation from the side control.

It is possible to prohibit the shutter operation from both of the

remote control and the side control.

Protection

Management

The Shutter Management function turns off the projection lamp

when the projector is left with the shutter closed and the set

time has passed away. The count-down time can be set between

5 and 480 minutes. When the count-down time has elapsed,

the shutter will be opened up automatically and the lamp will be

turned off to cool itself down. The SHUTTER indicator is blinking

blue during this cooling-off period. When the lamp has been fully

cooled down, the POWER indicator turns green lighting and the

SHUTTER indicator keeps blinking. Should the ON / STAND-BY

button be pressed in this condition, the projection lamp will be

turned on and the SHUTTER indicator turns off.

Effect

Choose the image effect at opening or closing the shutter from

the following options.

Off ............. Disable.

L1 .............. The Image will fade in and out at opening or

closing the shutter.

L2 .............. The Image will fade in and out more slowly

compared with L1.

Release key

Choose the active buttons to release the shutter when the

shutter is closed from the following options.

Any ............ By pressing any buttons on the remoter control

and the side control when the shutter is closed,

the shutter will be released.

SHUTTER .. Only the SHUTTER button on the remote control

and the side control can be released the shutter

when the shutter is closed.

Only the following buttons are active when the

shutter is closed;

- INPUT button and INPUT 1/2/3/4 button

- ON/STAND-BY button

Settings

Projector ID

Shutter