Figure 1–5. plugging a headset into the hro – Siemens 600 Series User Manual
Page 22
1–8
ROLMphone 300/600 User Guide
Headset/Recorder Option
The ROLMphone 600 series telephones can also
accept a module that lets you attach a headset and a
recorder: the Headset/Recorder Option (HRO). The
HRO provides for two different types of headset
connectors (the PJ327 type and the RJ8), which can
be plugged into the outlets on the back of the tele-
phone. When a headset is plugged into the option, the
speakerphone does not function.
Figure 1–5. Plugging a Headset into the HRO
The HRO also has an RJ45 connector for plugging in
a tape recorder. This connector looks like a bigger
version of the RJ8 headset connector. If either your
headset or recorder is not working the way you think
it should, make sure it is plugged into the correct HRO
connector. The HRO connectors are marked with
symbols for either a headset or a recorder.
Before the option is installed, the telephone must be
configured for it at the CBX. For more information,
see your CBX system administrator.
Note
In addition to recording the conversation of a
connected call, the recorder may also record user’s
comments between calls via the handset or headset.