Siemens 600 Series - Manual (Page 119)

Moving Calls 5–3
5. Movin
g
Calls
Forwarding
Forwarding automatically redirects your incoming
calls to another extension or an outside number,
referred to as a forwarding target. The CBX provides
two types of forwarding: fixed and variable.
Fixed Forwarding
Fixed Forwarding forwards calls to as many as two
different extensions set up at the CBX. Fixed For-
warding is often used to forward unanswered calls to
the PhoneMail system or to your company’s message
center.
Your CBX system administrator can select the
following conditions under which calls will be
forwarded:
• when your extension is busy
• when your extension rings, but no one answers (for
a period of time specified at the CBX)
• when your extension is in Do Not Disturb mode
• under any combination of the conditions mentioned
above
• forward all calls
Your system administrator can also specify that your
incoming calls from outside numbers be forwarded to
one extension and those from extensions to another.
You can cancel Fixed Forwarding to prevent incom-
ing calls from being forwarded, although this is rarely
necessary.
To cancel Fixed
Forwarding ➩ Get a dial tone.
➩ Dial # # 9 0.
Listen for the confirmation tone. If you have a
display telephone, SYSTEM FORWARD OFF
is displayed.
➩ Hang up.