Siemens 600 Series - Manual (Page 132)

5–16 ROLMphone 300/600 User Guide
To place a call
on system hold
on a non-display
phone or a dis-
play phone with-
out a System
Hold key ➩ Press the TRANSFR key.
You will hear the confirmation tone, followed
by the dial tone.
➩ Dial * 8.
➩ Dial the number of the slot to which you want
to assign the call (0 through 9). 0n display
phones, CALL PARKED IN SLOTand the
number of the slot to which the call has been as-
signed are displayed.
You will hear the confirmation tone.
➩ Hang up.
➩ Notify the party who will be retrieving the call
of the assigned slot number.
Note
If you hear a busy tone, press the CONNECT key to
return to your party. Then try the whole procedure
again using a different slot number. If you hear a fast
busy tone, there are no system slots available at this
time.
To retrieve a call
on system hold ➩ Get a dial tone.
➩ Press the System Hold (SYSHOLD) key, or dial
* 8. If you have a display telephone, ENTER
PARK SLOT NUMBER is displayed.
➩ Dial the number of the system slot.
➩ Begin speaking. If you do not have a speaker-
phone, you must pick up the handset to speak to
the other party.