Sony Ericsson GC89 - Manual (Page 48)

48 Advanced Wireless LAN Features
1. Select Start Control Panel, and then double-click Network Connections.
2. Under LAN or High-Speed Internet select each of the private network connections that you
want to be part of the bridge.
You must select at least two eligible network connections in order for Bridge Connections to
create a bridge.
3. Right click one of the highlighted private network connections, and select Bridge Connections.
You can create only one network bridge on a computer, but the bridge can accommodate any
number of network connections.
Caution!
Do not use this method to share a corporate network connection without first agreeing upon
security procedures with the network administrator.
Note:
• Adapters that have Internet Connection Sharing (ICS) or Internet Connection Firewall
(ICF) enabled cannot be part of the network bridge and will not appear on the Network
Bridge checklist. Similarly, the Add to Bridge menu command is available only for
adapters that you can add as connections to Network Bridge.
• Only Ethernet, IEEE-1394 adapters, or Ethernet compatible adapters such as wireless
and home phoneline adapters (HPNA), can be part of the network bridge.
• Do not create a bridge between the public Internet connection and the private network
connection, or add the public Internet connection to an existing network bridge, if you do
not have ICF or Internet Connection Sharing (ICS) enabled. To do so will create an
unprotected link between your network and the Internet, and your network will be
vulnerable to intrusions.
• If you remove adapters from the network bridge, and less than two adapters remain,
Network Bridge will not perform its intended function, but it will continue to use system
resources.
• Network adapters that previously appeared under LAN or High-Speed Internet, appear
under Network Bridge when they are added as connections. Network adapters that
provide Internet connectivity, such as DSL and cable modems, cannot be bridged and
will always appear under LAN or High-Speed Internet.
• Network bridges with wireless or IEEE-1394 connections support traffic using Internet
Protocol version 4 (IPv4) only.
4. Internet Connection Sharing, Internet Connection Firewall, Discovery and Control, and
Network Bridge are not available on Windows XP 64-Bit Edition.
Caution!
When sharing an internet connection, unwanted users within the reach of the wireless LAN
may be able to use it too. The use of security features such as WEP and WPA network keys
are recommended.
Creating profiles for ICS Client machines
Set up an ad hoc network on your host machine and each client. Follow the Create a Wireless LAN
Connection on page 18.