Sony Ericsson GC89 - Manual (Page 28)

28 Create a Wireless LAN Connection
7. Click OK.
8. Click OK.
The configuration of your wireless network connection is now complete. For information about the
status of your connection, see Viewing the Status of Your Wireless Connection on page 39.
Making a Basic Network Connection in Windows Millennium
These instructions are based on the assumption that your Sony Ericsson 802.11 Wireless LAN
Adapter is factory installed and that your software has been installed. If you received your wireless
network card as part of your computer, both of these procedures have been done for you. If you did
not receive your wireless network card as part of a computer, consult the Quick Start Guide that came
with your wireless network card for instructions on installing the hardware and software.
Windows Millennium users must use the Sony Ericsson Wireless Utility to configure wireless
network connections, as described in this section.
In countries other than the United States and Japan you must set the Location property to the country
in which you are using your Sony Ericsson 802.11 Wireless LAN Adapter. This ensures compliance
with local regulatory restrictions on transmit power and optimizes network performance.
Configuring Your Location
1. Click Start Settings Network and Dial-up Connections Local Area Connection.
2. Click Properties.
3. On the General tab of Local Area Connection Properties, click Configure.
4. Click the Advanced tab on Sony Ericsson 802.11 Wireless LAN Adapter Properties.
5. In the Property list, click Location, and then click the name of your location in the Value list.
Note:
If your location is not listed, click Default.