Siemens eWON4002 - Manual (Page 28)

eWON4002™
Installation Guide
page 25 of 35
ver 2.04
9.2 Ethernet
9.2.1 Direct connection
If the eWON® is connected directly to a PC, then use the crossed cable:
The eWON® can be accessed by a 10/100BaseTX
Ethernet connection. This connection can be made
with two different cables (straight or crossed). These
cables have 8 copper conductors and are known as
UTP Class 5 with RJ45 terminations at both ends.
These cables are availbale as spare parts (see
External accessories on page 3 ).
The type of cable (straight or crossed) depends on
the equipment the eWON® will be connected to. The
most current cases are the direct connection with a
PC (crossed) and the connection through a hub/
router (straight).
Ethernet
connector
Crossed
cable