Siemens eWON4002 - Manual (Page 24)

eWON4002™
Installation Guide
page 21 of 35
ver 2.04
• To configure the Ethernet IP address:
, , ,
• To configure the PPP IP address:
, , ,
6.2.2 Under Windows XP
1 ) With Windows XP, you first have to go to Start and select Connect to and then Show all connections.
Create a new connection appears in the network tasks box (top left corner).
2 ) Selecting Create a new connection menu opens the new connection creation wizard. Click Next.
3 ) Select the 2
nd option (out of 4) – Connect to the network at my workplace and then click Next.
4 ) Select the 1 st option (out of 2) – Dial-up connection and click Next.
5 ) Give a name to this connection and click Next.
6 ) Introduce the phone number of the eWON® and click Next.
7 ) Click Finish.
8 ) The connection windows opens and introduce the PPP authentication parameters that are the same than those
used to access to the eWON® embedded Web site (<adm> / <adm> by default).
9 ) The new connection has now been added in the “Connections” directory and also under Start and Connect to
as well as on your desktop if you selected the relevant option (Create icon on desktop).
10 ) You can now make a connection either by using the currently open window, or later on by using one of the
available paths (Start menu or desktop icon).
11 ) Wait until the modems are synchronized and that your PPP authentication has been accepted.
12 ) Launch your Internet navigator.
13 ) Introduce the IP address of the eWON® in the address field of the navigator (the default address is
202.0.0.240 in dial-up mode (see chapter IP parameters configuration on page 22 ).
14 ) The eWON® should then display its login Web page. If not (-404 Error, server not found-), redo the procedure
from the beginning and check whether you did not forget anything.
15 ) Unless you have changed them, introduce the default web site access login parameters that are:
• User Name:
• Password:
16 ) You can now access the different Web pages of the eWON® and, among others, configure your connection
parameters by selecting the following options in the menu of the home page:
• To configure the Ethernet IP address:
, , ,
• To configure the PPP IP address:
, , ,