Sony Cyber-shot 3-700-727-12(1) - Manual (Page 76)

76
Settings For details on the operation 1 page 69
Main Settings — Main Settings 2
The default settings are marked with .
Selects the USB mode when connecting the camera to a computer or a PictBridge compliant
printer using the USB cable.
This setting allows (TV) remote-control of a camera that is connected to a “BRAVIA” Sync
TV using an HDMI cable (not supplied). For details on “BRAVIA” Sync, see page
87 .
• You can do the playback operation with the remote controller of your TV by connecting your camera to a
“BRAVIA” Sync compatible TV launched in 2008 or later with the HDMI cable.
USB Connect
PictBridge Connects the camera to a PictBridge compliant printer
(page 106).
Mass Storage Establishes a Mass Storage connection between the camera
and a computer or other USB device (page 94).
Auto The camera recognizes automatically and sets up
communication with a computer or PictBridge compliant
printer (pages 94 and 106).
• If you cannot connect the camera to a PictBridge compliant
printer with the [Auto] setting, select [PictBridge].
• If you cannot connect the camera to a computer or a USB device
with the [Auto] setting, select [Mass Storage].
CTRL FOR HDMI
On Allows remote-controlled operation.
Off Disallows remote-controlled operation.