beautypg.com

Technical specifictions, Technical specifictions -17 – Symbol Technologies LS 3603 User Manual

Page 25

background image

1-17

User’s Guide

Technical Specifictions

Table 1-1. Technical Specifications

ITEM

DESCRIPTION

Power Requirements*

Wand
RS-232C
Synapse

4.8 (min) to 14.0 VDC (max)
150 mA @ 5V typical
150 mA @ 5V typical
150 mA @ 5V typical

Decode Capability

The LS 3603 can be programmed to decode the following
code types: UPC/EAN, Code 39, Code 39 Full ASCII,
Codabar, Interleaved 2 of 5, Code 128, EAN 128,
Discrete 2 of 5, Code 93, and MSI/Plessey. Set code length(s)
for any 2 of 5 code type. The LS 3603 can autodiscriminate
between all of the above code types except for Code 39 and
Code 39 Full ASCII. Transmission of decoded information
will depend on the capabilities of the attached terminal.

Beeper Operation

User-selectable: Enabled, Disabled.

Scan Repetition Rate

36 (± 3) scans/sec (bidirectional)

Roll (Skew) Tolerance

± 10° from normal

Pitch

± 50° from normal

Yaw

± 60° from normal

Decode Depth of Field

See Decode Zone

Print Contrast Minimum

25% absolute dark/light differential, measured at 675 nm.

Ambient Light Immunity

Artificial Lighting
Sunlight

200 ft. candles

2153 lux

8000 ft. candles

86112 lux
(@8 in. (20 cm) on low density bar
codes)