Set up, Unpacking, Switching cables – Symbol Technologies LS 3603 User Manual
Page 10: Power options, Connecting your scanner, Set up -2
1-2
LS 3603 Product Reference Guide
Set Up
Unpacking
Remove the scanner from its packing and inspect it for damage. If the scanner
was damaged in transit, call the Symbol Support Center at one of the telephone
numbers listed on
. KEEP THE PACKING. It is the approved shipping
container and should be used if you ever need to return your equipment for
servicing.
Switching Cables
Different cables are required for different hosts. To change the scanner cable:
•
Slide collar down over cable
•
Plug in modular connector
•
Slide collar up into keys
•
Twist to snap in place
Power Options
Three power options are available:
•
External power supply
•
Battery Box
•
Direct Host Power
Available power options are host dependent.
Connecting Your Scanner
With some terminal types, the LS 3603 is unable to answer host terminal polls
until the appropriate host type is selected. This may result in an error message
generated by the host. To correct this situation, select the proper parameter set
and initialize the host terminal. See Chapter 2 for more information.